6-10 Installing Expansion Cards
F418IL PCI-E Slot Configurations
Some F418IL chassis models support one expansion card in each node, Refer to
the tables below to determine the PCI-E slot configuration for your particular chassis.
F418IL-R1K62BP Node Layout Specifications
Front of Node
One Low-profile Expansion Card
Installing Front Low-profile Expansion Cards
The following instructions are for chassis nodes in which the expansion cards are
mounted in the front of the node.
PCI-E Slot Clip
Figure 6-10: I/O Shield Configuration
6-11
Chapter 6: Advanced Chassis Setup
Rear of Node
Two fixed 3.5" HDD
PCI-E
Slot Shield