Installing The Expansion Cards; Installing Expansion Cards - Supermicro SuperStorage 2029P-DN2R24L User Manual

SuperStorage Server 2029P-DN2R24L User's Manual

Installing the Expansion Cards

The SC227TS provides two PCI slots for low-profile expansion cards. Note that the
motherboard must be installed prior to the installation of the expansion cards.

Installing Expansion Cards

Installing an Expansion Cards
1. Power down the system, as described in Section 3-1, and remove the power cords from
the rear of the power supplies.
2. Remove the motherboard modules as described previously in this section.
3. Plug the expansion cards into the expansion card bracket and connect the COM port
cable.
4. Place the expansion card bracket onto the motherboard as shown.
5. Secure the expansion card bracket onto the motherboard using the screw provided.
6. Plug the power cords into the rear of the power supplies and power up the system.
Figure 3-9. Removing the Expansion Cards
45