Table of Contents
Advertisement
SuperStorage SSG-6029P-E1CR24H/L User's Manual
Releasing the Inner Rail
It is necessary to release the inner rail from the middle and outer rails before installing the
inner rail on the chassis.
Releasing the Inner Rail from the Middle and Outer Rails
1. Lift the front latch on the inner rail and pull the inner rail out of the middle rail, and the
middle rail out of the outer rail until the rails are fully extended.
2. Press down the locking lever on the inside of the inner rail to release the inner rail.
Continue to pull the inner rail out of the middle rail.
Front Latch on
Inner Rail
Locking Lever
Front Latch
Figure 2-2. Extending the Rails and Releasing the Inner Rail
Warning: Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing. Failure to
stabilize the rack can cause the rack to tip over.
Inner Rail
on Inner Rail
Locking Lever on Middle
Rail (on inside of rail)
Middle Rail
22
Outer Rail
Advertisement
Table of Contents
