Supermicro SuperStorage SSG-6029P-E1CR24H User Manual page 108

SuperStorage SSG-6029P-E1CR24H/L User's Manual
Maximum Read Request
Select Auto to allow the system BIOS to automatically set the maximum read request size
for a PCI-E device to enhance system performance. The options are Auto, 128 Bytes, 256
Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
MMCFG Base
Use this feature to select the default value for the PCI MMIO (Memory-Mapped IO) base
address. The options are 1G, 1.5G, 1.75G, 2G, 2.25G, and 3G.
NVMe Firmware Source
Use this item to select the NVMe firmware to support booting. The options are Vendor
Defined Firmware and AMI Native Support. The default option, Vendor Defined Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is offered by the BIOS with a generic method.
VGA Priority
Use this item to select the graphics device to be used as the primary video display for system
boot. The options are Onboard and Offboard.
CPU2 SLOT1 PCI-E 3.0 x8 OPROM, CPU2 SLOT2 PCI-E 3.0 x16 OPROM, CPU2
SLOT3 PCI-E 3.0 x16 OPROM, CPU1 JMEZZ1 PCI-E 3.0 x8 OPROM
Select Disabled to deactivate the selected slot, Legacy to activate the slot in legacy mode,
and EFI to activate the slot in EFI mode. The options are Disabled, Legacy, and EFI.
Bus Master Enable
This item allows PCI bus driver enable/disable the bus master bit. The options are Enabled
and Disabled.
Onboard LAN1 Option ROM
Use this item to select the type of device to be installed in LAN port1 used for system boot.
The options are Disabled, Legacy, and EFI.
Onboard LAN2 Option ROM
Use this item to select the type of device to be installed in LAN port2 used for system boot.
The options are Disabled, Legacy, and EFI.
Onboard NVMe1 Option ROM, Onboard NVMe2 Option ROM, Onboard NVMe3 Option
ROM, Onboard NVMe4 Option ROM
Select Disabled to deactivate the selected slot, Legacy to activate the slot in legacy mode,
and EFI to activate the slot in EFI mode. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Select Legacy to boot the system using a legacy video device installed on the motherboard.
The options are Disabled, Legacy, and EFI.
108