Table of Contents
Advertisement
SuperStorage SSG-6029P-E1CR24H/L User's Manual
1.3 System Features
The following table provides you with an overview of the main features of the
SSG-6029P-E1CR24H/L. Please refer to Appendix C for additional specifications.
Motherboard
X11DSC+
Chassis
SC826SE1C4-R1K62
CPU
The X11DSC+ serverboard supports dual
Intel® Xeon® 81xx/61xx/51xx/41xx/31xx and 82xx/62xx/52xx/42xx/32xx series (Socket P) processors which offer
three Intel
UltraPath Interconnect (UPI) of up to 10.4 GT/s.
®
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers.
Refer to the block diagram on page 17 to determine which slots or devices may be affected.
Socket Type
Socket P
Memory
The integrated memory controller embedded in the processor supports up to 6 TB of 3DS Load Reduced
DIMM (3DS LRDIMM), 3DS Registered NVDIMM and DIMM (3DS RDIMM) DDR4 (288-pin) ECC of up to
2933/2666 MHz modules in 24 slots.
Chipset
Intel PCH C621 chipset
Expansion Slots
Supports the following expansion slots:
•
One PCI-E 3.0 x16 SIOM networking slot supported by CPU1
•
One PCI-E 3.0 x8+x8 SAS3 AOM slot for mezzanine card supported by CPU1
•
One PCI-E 3.0 x8 slot supported by CPU2 (CPU2 Slot1)
•
Two PCI-E 3.0 x16 slots supported by CPU2 (CPU2 Slot2/CPU2 Slot3)
Hard Drives
Twenty-four 3.5"" mid-chassis and two rear mounted hot-swap drive bays for SAS3/SATA4/NVMe drives
Cooling
Five 8-cm chassis fans
Power
1600 Watt redundant power supply
Form Factor
2U rackmount
Dimensions
(WxHxD) 17.2 x 3.5 x 30.7-in (437 x 89 x 780-mm)
System Features
10
Advertisement
Table of Contents
