Supermicro SuperStorage SSG-6029P-E1CR24H User Manual page 105

Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which will provide complete legacy
USB keyboard support for the operating systems that do not support legacy USB devices.
The options are Disabled and Enabled.
PCIe PLL SSC
Use this feature to enable PCI-E Phase-locked Loop (PLL) Spread Spectrum Clocking
(SSC). The options are Disable and Enable.
Server ME Configuration
This feature displays the following system ME configuration settings.
•
Operational Firmware Version
•
Backup Firmware Version
•
Recovery Firmware Version
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
PCH SATA Configuration
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel® PCH chip
The options are Disable and Enable.
Configure SATA as
Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID
to configure a SATA drive specified by the user as a RAID drive. The options are AHCI and
RAID.
SATA HDD Unlock
Select Enable to unlock the HDD password. The options are Disable and Enable.
Aggressive Link Power Management
When this item is set to Enable, the SATA AHCI controller manages the power usage of the
SATA link. The controller will put the link to a low power state when the I/O is inactive for an
extended period of time, and the power state will return to normal when the I/O becomes
active. The options are Disable and Enable.
105
Chapter 6: UEFI BIOS
.