Table of Contents
Advertisement
3.2 Accessing the System
Removing the Top Covers
Mid-chassis Cover
The mid-chassis cover can be removed to access the mid-chassis drives or fans while the
server continues to operate.
Removing the Mid-chassis Cover
Remove the two screws securing each side of the cover, push in the release buttons, then
lift the cover.
Warning: Except for short periods of time, do not operate the server without the cover in place.
The chassis cover must be in place to allow for proper airflow and to prevent overheating.
Remove Screw
Push Button
Chapter 3: Maintenance and Component Installation
Figure 3-1. Removing the Mid-chassis Cover
Remove Screw
Push Button
32
Advertisement
Table of Contents
