Installing Riser Expansion Cards (9-12) - Supermicro AS-8125GS-TNHR User Manual

Installing Riser Expansion Cards (9-12)

Expansion cards can be added in slots 9 -12 by means of riser cards mounted on riser card
brackets as shown below.
1. Power down the system and remove the PCIe tray as described in
2. Unscrew (four screws for each) and remove the riser card bracket for the slots you want
to use.
Riser Card Brackets
Figure 3-16. Removing Riser Card Brackets and Shields
Chapter 3: Maintenance and Component Installation
4th Screw Hole
57
Section 3.2.