Installing Pci Expansion Cards - Supermicro SUPERSERVER 1028U-E1CR4+ User Manual

SUPERSERVER 1028U-E1CR(4/TP)+ Series User's Manual
6-6

Installing PCI Expansion Cards

The system accepts two full height full-length expansion cards or one double width
GPU, and one low profile card, mounted on a riser card and riser bracket. There is
also an internal expansion slot in the center of the chassis on some models (see
the table below).
Additional fans are recommended; see Section 6-8.
Figure 6-5. PCI Expansion Card Chassis Slots
Expansion Card Configurations
Slot Mechanical
1* Internal low profile, half length
2 Low profile, half length
3 Full Height, full length
4 Full Height, full length
Full height = 4.2", Low profile = 2.5", Full length = 10.5", Half length = 6.6"
* This slot supports only Supermicro SAS Cards listed below.
Part Number
AOC-S3008L-L8e
(8-port HBA)
AOC-S3008L-L8i
(8-port SW RAID)
AOC-S3108L-H8iR
(8-port HW RAID)
1
1
Supermicro SAS Cards
Description
Std LP, 8 internal ports, 12 Gb/s per port, Gen 3, 122HDD,
HBA
Std LP, 8 internal ports, 12 Gb/s per port, Gen 3, 63HDD,
RAID 0, 1, 1E
Std LP, 8 internal ports, 12 Gb/s per port, Gen 3, 240HDD,
RAID 0, 1, 5, 6, 10, 50 ,60
6-6
1
2
Electrical
x8 (CPU1)
x8 (CPU2)
x16 (CPU2)
x16 (CPU2)
1
3
1
4