Supermicro SuperStorage SSG-6029P-E1CR24H User Manual page 51

SuperStorage SSG-6029P-E1CR24H/L User's Manual
3. Insert the drive into the carrier with the printed circuit board side facing downward and
so that the mounting holes in the drive align with those in the carrier.
4. Secure the drive to the carrier with the four screws included with the drive.
5. Insert the drive and carrier into its bay, keeping the carrier oriented so that the release
button is on the right. When the carrier reaches the rear of the bay, the release handle
will retract.
6. Using the thumb, push the drive carrier handle until it clicks into the locked position.
Figure 3-6. Locking the Drive Carrier into Place
Caution: Except for short periods of time, such as swapping hard drives, do not operate the
server with the hard drive bays empty.
Note: Enterprise level hard disk drives are recommended for use in Supermicro chassis and
servers. For information on recommended HDDs, visit the Supermicro website at
supermicro.com/products/nfo/files/storage/SBB-HDDCompList.pdf
51
http://www.