Supermicro SuperStorage SSG-6029P-E1CR24H User Manual page 58

SuperStorage SSG-6029P-E1CR24H/L User's Manual
7. Connect the four CBL-SAST-0929 cables from the motherboard's P1_NVMe0 - P1_
NVMe3 ports to the second backplane's JSM4 – JSM7 ports respectively as shown
below. Please notice that the arrangement of ports on the backplane is not in sequence
due to design limitations..
8. The four NVMe drives have to be installed in the last four slots of the second backplane,
namely slots 20-23. In addition, it is recommended that you always install the NVMe
drives in an ascending matter, for instance install drive slot 20 first.
9. Please follow installation instruction from section "Installing a Hard Disk Drive" for drive
tray installation.
Figure 3-16. NVMe Ports
58