SuperStorage SSG-6029P-E1CR24H/L User's Manual
Power Supply
The chassis features redundant 1600 Watt power supplies. The power modules can be
changed without powering down the system. New units can be ordered directly from
Supermicro or authorized distributors.
These power supplies are auto-switching capable. This feature enables them to automatically
sense the input voltage and operate at a 100-120v or 180-240v. An amber light will be
illuminated on the power supply when the power is off. An illuminated green light indicates
that the power supply is operating.
Changing the Power Supply:
1. Unplug the AC cord from the module to be replaced.
2. Push the release tab on the back of the power supply as illustrated.
3. Pull the power supply out using the handle provided.
3
Release Tab
4. Replace the failed power module with the same model.
5. Push the new power supply module into the power bay until it clicks.
6. Plug the AC power cord back into the module.
Figure 3-20. Power Supply Release Tab
62