Foreword - Watts Aerco Innovation 800 User Manual

Innovation Hot Water Hot Water Boiler User Manual
The AERCO Innovation Series Potable Hot Water Boilers are modulating units which represent
a true industry advance that meets the needs of today's energy efficiency and environmental
concerns. Designed for use in any domestic water heating system, each Innovation model
provides precisely-controlled potable water within ± 2°F (1.1°C) of setpoint, regardless of flow
rate. Innovation's compact size and varied venting capabilities allow maximum installation
flexibility. The Innovation Series Heaters, with their load tracking controls modulate over a 20:1
turn down ratio to match the system demand and yield high thermal efficiencies.
Innovation Hot Water Boilers are available in three 3) different sizes ranging from 1,060,000
BTU/Hr. (311 kW) input to 1,350,000 BTU/Hr. (396 kW) input. In addition, all Innovation Heater
sizes now include Water Heater Management (WHM) software which is built in to the C-More
Controllers furnished with each unit. When the heater is ordered with a Sequencing Valve (SV),
up to eight (8) Innovation Hot Water Boilers can be controlled by the WHM system utilizing
RS485 Modbus protocol. All available Innovation Hot Water Boiler models are listed in the table
on the following page. As this table shows, units can be ordered with Factory Mutual (FM) or
Double Block and Bleed Gas Trains with or without Sequencing Valves.
Whether used in singular or modular arrangements, the Innovation Heaters offer the maximum
flexibility in venting with minimum installation space requirements. Innovation's advanced
electronic controls offer simplified integration with today's Energy Management Systems.
For service or parts, contact your local sales representative or AERCO International, Inc.
Unless otherwise specified, the descriptions and procedures provided in
this Installation, Operation & Maintenance Manual apply to all Innovation
Series Hot Water Boilers.
INNOVATION POTABLE HOT WATER BOILER MODELS
Part Number
INN800
INN1060
INN1350
OMM-0120_0A
GF-128-I
FORWARD

FOREWORD

IMPORTANT
Innovation Potable Hot Water Boiler, 800,000 BTU/Hr. (234.5
kW) Input
Innovation Potable Hot Water Boiler, 1,060,000 BTU/HR
(310.7 kW) Input
Innovation Potable Hot Water Boiler, 1,350,000 BTU/HR
(395.6 kW) Input
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913
Phone: 800-526-0288
– INTERNATIONAL
Description
Shipping
Weight
1,080 lbs.
(489.9 kg.)
1,100 lbs.
(499.0 kg.)
1,150 lbs.
(521.6 kg.)
Page 7 of 174
11/15/2016