Calibration Menu - Watts Aerco Innovation 800 User Manual

Innovation Hot Water Hot Water Boiler User Manual
Menu Item Display
19 Breakpt at 30%
20 Breakpt at 20%
21 Breakpt at 10%
22 Breakpt at 0%
WHM Items – the following item appear only if WHM is enabled
23 FDback Start Pos
24 Fdback End Pos
25 Max Feedback
26 Fdback Value
27 Temp Gov
28 GOV Limit-5
29 GOV Limit-7
30 GOV Limit-10
31 GOV Limit-12
32 GOV Limit-15
33 PID Output
34 P Output
35 I Output
36 D Output
37 Reset Defaults

3.8 CALIBRATION MENU

The Calibration menu is used by factory trained service personnel to adjust or reset the
parameters listed below.
A full description of each item appears in Table A-5 of Appendix A – Innovation Menu Item
Descriptions.
Menu Item Display
1
Stepper Fbk
2 Purge Timer
3 Post Purge Timer
OMM-0120_0A
GF-128-I
CHAPTER 3 – OPERATION
Available Choices or Limits
Minimum
30°F (-1.1°C)
30°F (-1.1°C)
30°F (-1.1°C)
30°F (-1.1°C)
0%
0%
0%
0%
0
0
0
0
0
0%
0%
0%
0%
Yes
Table 3-6: Calibration Menu
Available Choices or Limits
Minimum
Cal 100%
Verify 50%
5 sec.
0 sec.
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913
Phone: 800-526-0288
- INTERNATIONAL
Maximum
240°F (115.6°C)
240°F (115.6°C)
240°F (115.6°C)
240°F (115.6°C)
100%
100%
100%
100%
Enable or Disable
100
100
100
100
100
100%
100%
100%
100%
No
Maximum
Cal 0%
60 sec
60 sec.
Default
103°F(39.4°C)
118°F (47.8°C)
134°F (56.7°C)
136°F (57.8°C)
30%
60%
30%
Read Only Value
Enable
30
20
15
10
5
Read Only Value
Read Only Value
Read Only Value
Read Only Value
No
Default
Cal 0%
Depends on unit type/size
0 sec.
Page 43 of 174
11/15/2016