Machine Lifting And Tie Down; Lifting; Tie Down - JLG E450AJ Operation And Safety Manual

4.13 MACHINE LIFTING AND TIE DOWN

See Figure 4-5.

Lifting

1. Refer to the Serial Number Plate, refer to the Specifications
section of this manual, or weigh the individual unit to find
out the Gross Vehicle Weight.
2. Place the boom in the stowed position.
3.
Remove all loose items from the machine.
4.
Attach lifting device and equipment only to the designated
lifting points.
5.
Properly adjust the rigging to prevent damage to the
machine and so the machine remains level.

Tie Down

WHEN TRANSPORTING THE MACHINE, THE BOOM MUST BE FULLY LOWERED INTO
THE BOOM REST.
1. Place the boom in the stowed position.
2. Remove all loose items from the machine.
31215012
SECTION 4 - MACHINE OPERATION
3. Secure the chassis using straps or chains of adequate
strength.
4.
Ensure the platform is lowered so the wear pad on the bot-
tom rests on the surface of the transportation vehicle.
5.
Secure through the tie downs on the boom using straps or
chains of adequate strength.
4-17