JLG ES1330L Operation & Safety Manual page 48

Machine Controls, Indicators, and Operation
Lift/Drive Select Switch
Note: When selecting between the lift and drive functions the joystick control must be
returned to the neutral position for approximately 1/2 second before the function
change is operable.
This toggle switch is used to select operation of either the drive or lift function. After
selecting a function, the joystick controller must be used in order to activate that
function. Only change the function selected, with the joystick in the neutral position.
Otherwise, the function selected will not change until the joystick is returned to the
neutral position.
Mobile Phone Cradle (If Equipped)
Provides an enclosed area for mobile phones in the platform.
Overload Indicator (LSS)
The Overload Indicator indicates when the platform has been overloaded. An audible
alarm will also signal when the platform is overloaded.
Note: If the Overload Indicator is illuminated, further elevation will be prevented. Re-
duce the weight in the platform to not exceed the rated workload indicated on
the capacity decal, then the controls will work again.
Note: When ambient temperatures are below freezing, the LSS will have a reduction in
available capacity. This will trigger the LSS before achieving the maximum allow-
able capacity.
Raising And Lowering Platform
1. If the machine was shut down, place the key selector switch to the
platform position.
2. Position both emergency stop switches, to the ON position.
3. Position the lift/drive select switch to lift.
4. Squeeze and hold the trigger switch, and move the joystick back (plat-
form up - white arrow direction) or move the joystick forward (plat-
form down - black arrow direction) and hold until desired elevation is
reached. Releasing the trigger switch or moving the joystick back to its
center position will stop the function being operated.
Steering
On the platform control station, position the lift/drive select switch to the drive position.
To steer the machine, engage trigger switch and the thumb operated steer rocker-switch
on the joystick handle. Press to the right for steering right, or to the left for steering left.
When released, the switch will return to the center-off position and the wheels will
remain in the previously selected position.
To return the wheels to the center position, the switch must be activated in the opposite
direction until the wheels are centered.
48
31221553 ES1330L, ES1530L