Battery Maintenance And Charging - JLG ES1330L Operation & Safety Manual

3. Lower the platform until the prop rests against the prop stop on the arm set
below it, stopping all downward movement of the platform/scissor arm assembly.
4. Turn off machine power by pressing the emergency stop switch at the Ground
Control Station.
To disengage the safety prop:
1. Pull out the emergency stop switch at the ground and raise the platform enough
to release the prop off the prop stop.
2. Rotate the prop assembly counterclockwise until it is resting on the arm prop
holder plate on the side of the scissor arm assembly.
6.7

BATTERY MAINTENANCE AND CHARGING

To avoid injury from an explosion, do not smoke or allow sparks or a flame near
battery during servicing. Always wear eye and hand protection when servicing
batteries.
ES1330L, ES1530L
Machine Specifications and Operator Maintenance
WARNING
31221553
87