Installation
3.9.3 Acknowledgement of completed start-up
3.10 Cleaning the exterior
If a start-up report is not supplied with the machine on delivery, the following infor-
mation must be completed and acknowledged by the customer for each start-up:
Machine type:
Machine serial number:
Installation date:
Customer:
Postal address:
Telephone:
Contact:
Dealer:
Telephone:
Contact:
Installation company:
Telephone:
Contact:
Service company:
Telephone:
Detergent supplier:
Telephone:
End user's signature:
Name in block capitals
Remove the protective plastic from the machine and polish it with a suitable clean-
ing material for stainless steel plate.
Use a suitable solvent to remove any residual adhesive from the plastic. Rub with a
forwards and backwards movement in the polishing direction of the plate. Wire brush-
es or wire wool should not be used as they will damage the stainless steel plate.
WD-59CT & WD-66CT
24
Rev. 2.0 (20110124)