Trial Operation; Start-Up Schedule - Wexiodisk WD-6 DUPLUS Installation And User Manual

Installation

3.7 Trial operation

3.7.1 Start-up schedule

Machine type:
Machine serial number:
Installation date:
Prepare the machine for a trial run by following the INSTRUCTIONS FOR USE.
The instructions describe the measures that must be taken to prepare the
machine for operation.
Read the installation and user manuals carefully. Then check the following points:
1. Check:
• Water and drain connections
• That the dishwasher stands level
• Detergent and drying agent
• That the filters and level pipe are in place
• That the overheating protection device is reset
2. Filling the machine:
• Turn on the power switch and any circuit breakers
• Close the hood
• Fill the machine with water in accordance with the INSTRUCTIONS FOR
USE
(Check the non-return valve located after the booster heater if the machine
does not fill.)
• Bleed the hood cylinder (option) as per the manual
3. Start the machine:
• Check the direction of rotation of all pumps
NB! If the direction of rotation is wrong, two phases should be switched at
the power switch.
4. Check the setting of the reference values:
• All the reference values have been set to the recommended values on
delivery
• Check the temperatures.
WD-6 DUPLUS
27
Rev. 4.0 (202202)