Table of Contents
Advertisement
Installation
3.4 Marking of sections
The machine is normally divided into two sections. The installation instructions
describe the assembly of a machine that has been split into two sections. The
sections are marked on the outside of the packaging with the following informa-
tion.
•
Numbering 1-2. Section 1 = infeed section with washing zones, Section 2
= outfeed section with final rinse and drying zone.
•
Arrows which indicate the feed direction of the machine.
•
Marking of the front. FRONT = Front.
FRONT
Section marking on the packaging
WD-59CT & WD-66CT
2
8
Rev. 2.0 (20110124)
1
FRONT
66CT_02
Advertisement
Table of Contents
