Trial Operation; Start-Up Schedule - Wexiodisk WD-4S Installation And User Manual

Installation instructions

3.6 Trial operation

3.6.1 Start-up schedule

Prepare the machine for trial operation with the help of OPERATING INSTRUC-
TIONS. The instructions describe the measures that must be taken to prepare the
machine for operation.
This should be completed when the machine is started up and used.
Machine type:
Machine serial number:
Installation date:
Read the installation and user manuals carefully. Then check the following points:
1. Check:
• Water and drain connections
• That the machine is evenly balanced
• Detergent and drying agent equipment is correctly connected to tank (op-
tion)
• Strainers and active filters (option) are in place
• The water flow and pressure are sufficient (see chapter TECHNICAL
SPECIFICATIONS)
2. Filling the machine:
• Switch on the power switch
• Press the ON/OFF button
• Close the door. If it is closed, open and close it again.
• Fill the machine with water according to the chapter USING THE DISH-
WASHER
3. Start the machine:
• Empty the machine and refill it
• Check that the final rinse flow is between 17-22 litres. This is done after the
second filling has been performed. The value can be read in accordance
with table V in the "adjustment instructions"
4. Check the setting of the reference values:
• All the reference values have been set to the recommended values on de-
livery
• Check the temperatures
WD-4S
22
Rev. 5.0 (201912)