Table of Contents
Advertisement
Installation instructions
3.7 Trial operation
Prepare the machine for trial operation with the help of OPERATING INSTRUC-
TIONS. The instructions describe the measures that must be taken to prepare the
machine for operation.
3.7.1 Start-up schedule
This should be completed when the machine is started up and used.
Read the installation and user manuals carefully. Then check the following points:
1. Check:
•
•
•
•
2. Filling the machine:
•
•
•
3. Start the machine:
•
4. Run a number of baskets complete with loads and check that:
•
•
•
•
5. Final check: Empty the machine and turn off the power using the main
switch.
•
•
•
Machine type:
Machine serial number:
Installation date:
Water and drain connections
That the machine is evenly balanced
That strainers are in place
The drain lever is closed
NB: The dishwasher that is connected must be started
Press the 0/1 button
Fill the machine with water in accordance with the manual
Check the pump's direction of rotation
N.B.! If the direction of rotation is wrong, the phase must be inverted on the
lockable main switch
There are no water leaks
The hood switch functions
The automatic hood functions (option)
The automatic start function works (option)
Re-tighten all the connections on the contactors and any circuit breakers
Set all the circuit breakers to the ON position
Display the quick guide supplied with the machine
WD-PRM6 & WD-PRM7
19
Rev. 5.0 (201902)
Advertisement
Table of Contents
