YASKAWA CIMR-DC4A0040AAA Technical Manual page 84

4.3 The Drive and Programming Modes
8.
Press and the converter will confirm the change.
9. The display automatically returns to the screen shown in Step 4.
10. Press the
key until back at the initial display.
◆ Verifying Parameter Changes: Verify Mode
The Verify Mode lists edited parameters from the Programming Mode. The Verify Mode helps determine which settings
have been changed, and is particularly useful when replacing a converter. If no settings have been changed, the Verify
Mode will read "None". The Verify Mode also allows users to quickly access and re-edit any parameter settings that have
been changed.
Note: A1-, and A2-01 to A2-32 are not displayed even when those parameters have been changed from their default values.
1. Turn on the power to the converter. The initial display appears.
2.
Press or until the display shows the top of the Verify Menu.
Press to enter the list of parameters that have been edited from their original
default settings.
3.
If parameters other than b1-02 have been changed, use the
until b1-02 appears.
4.
Press the key to access the setting value.
84
Step
Step
YASKAWA ELECTRIC SIEP C710656 06F YASKAWA Power Regenerative Converter - D1000 Technical Manual
or key to scroll
Display/Result
Entry Accepted
-PRMSET- PRG
Run Source 1
b1-02=0 *0*
Operator
← →
- MODE - DRV Rdy
Volt Ref(OPR)
U1-51= 330V
U1-52= 330V
RSEQ
U1-03= 0.00A LREF
Display/Result
- MODE - DRV Rdy
Volt Ref (OPR)
U1-51= 330V
U1-52= 330V
RSEQ
U1-53= 0.00A
LREF
- MODE - PRG
Modified Consts
Modified
X Parameters
HELP DATA
- VERIFY - PRG Rdy
Run Source 1
b1-02 = 0 *0*
Operator
Home DATA
- VERIFY - PRG Rdy
Run Source 1
b1-02 = 0 *0*
Operator
"1"
Home DATA