YASKAWA CIMR-DC4A0040AAA Technical Manual page 34

2.2 Mechanical Installation
◆ Digital Operator Remote Usage
■ Remote Operation
The digital operator mounted on the converter can be removed and connected to the converter using a remote control
extension cable up to 3 m long to facilitate operation when the converter is installed in a location where it can not be
easily accessed.
The digital operator can also be permanently mounted in remote locations such as panel doors using a remote control
extension cable and an installation support set (depending on the installation type).
■ Digital Operator Dimensions
<1> If you install the digital operator in a control panel or other enclosure, use the optional remote control extension cable.
34
Converter
Communication
Cable Connector
12.2
7.9
60
minimum
Figure 2.9 Digital Operator Dimensions
YASKAWA ELECTRIC SIEP C710656 06F YASKAWA Power Regenerative Converter - D1000 Technical Manual
Operator
S / N : J007XE273710001
Communication Cable Connector
Installation holes (2-M3 screws, depth 5)
1.6
S / N : J007XE273710001
<1>
50
44
Unit: mm