Get Current Range Gate Settings >Lm,Ig,X*<Cs><Cr - Safran LRF 6019 Manual

LRF 6019 Integrator Manual
6.6.5 Get current range gate settings >LM,Ig,x*<CS><CR>
This command retrieves the current range gate settings.
The parameter x can only take the values:
 x=1  Retrieves the minimum range gate settings.
 x=2  Retrieves the maximum range gate settings.
Get current range gate settings command and response
Command
Inputs
>LM,Ig,x*<CS><CR>
>LM,Ig,1*D2<0D>
Response
Outputs
>LM,Ig,g*<CS><CR>
> LM,Ig,00000*91<0D>
Example of a get range gate (min) settings command transaction:
Host  LRF Module
Command frame:
LRF Module  Host
Acknowledge frame:
Response frame:
Prompt:
914928_TML_LRF6019_en_Version C
Confidential & Proprietary  Safran Vectronix AG – All rights reserved
Description
Get current range gate settings.
Example with x=1, get minimum gate range.
Description
Response of the LRF module with parameter x=1.
Example with range gate (g) being zero.
Table 18: Get current range gate settings command
>LM,Ig,1*D2<0D>
>AC*84<0D>
>LM,Ig,00000*91<0D>
<
Public: 04.2019
Page: 54/70