Use Of Lrf Module With Safran Vectronix Terminal Software - Safran LRF 6019 Manual

LRF 6019 Integrator Manual

3.4 Use of LRF module with Safran Vectronix Terminal Software

To run a LRF module with the Terminal Software, ensure that the Terminal Software is installed on your
PC and the LRF module is connected correctly to your PC. The below mentioned guide shows how to use
the Terminal Software.
1) Select the module you are using from the drop down list.
2) Select the settings tab and select Interface.
3) Either set the settings manually and press OK or select "Search for LRF Module...".
 (Please note: values above are for illustration only and may differ to your modules requirements)
914928_TML_LRF6019_en_Version C
Confidential & Proprietary  Safran Vectronix AG – All rights reserved
Public: 04.2019
Page: 17/70