LRF 7047- Integrator Manual
6.6.5
Get current range gate settings >LM,Ig,x*<CS><CR>
This command retrieves the current range gate settings.
The parameter x can only take the values:
x=1 Retrieves the minimum range gate settings.
x=2 Retrieves the maximum range gate settings.
Get current range gate settings command and response
Command
Inputs
>LM,Ig,x*<CS><CR>
>LM,Ig,1*D2<0D>
Response
Outputs
>LM,Ig,g*<CS><CR>
>
LM,Ig,00000*91<0D>
Example of a get range gate (min) settings command transaction:
Host LRF Module
Command frame:
LRF Module Host
Acknowledge frame:
Response frame:
Prompt:
914929_TML_LRF7047_en_Version B
Confidential & Proprietary Safran Vectronix AG – All rights reserved
Description
Get current range gate settings.
Example with x=1, get minimum gate range.
Description
Response of the LRF module with parameter x=1.
Example with range gate (g) being zero.
Table 18: Get current range gate settings command
>LM,Ig,1*D2<0D>
>AC*84<0D>
>LM,Ig,00000*91<0D>
<
Public: 04.2019
Page: 55/72