Mounting Structure Requirements; Mounting Angle And Stack Requirement - Alpha ESS SMILE-G3-S3.6 Installation, Operation & Maintenance Manual

32

5.3.3. Mounting Structure Requirements

Ensure the mounting location and fireproofing meets the requirements of AS5139.

The surface to which the Battery System is to be mounted shall be fire-rated

where required by local regulations (e.g. AS5139).
Out of an abundance of caution, itt is recommended that the system be mounted

on non-flammable building materials even when not required by local regulations.
Ensure that the mounting surface is sufficiently sturdy to bear the weight of the

Product.
In residential installation, do not mount the inverter on drywalls or walls made of

gyprock or similar materials with poor sound insulation. The noise generated by
the inverter can be noticeable and may be exacerbated by locations with poor
insulation or where echoing may occur.

5.3.4. Mounting Angle and Stack Requirement

The inverter should be secured to a suitably sturdy wall.
Do not mount the inverter at forward tilted, side tilted, horizontal, or inverted
positions.