Table of Contents
Advertisement
10
2. Safety
2.1. Intended Use
The inverter, battery packs and the electricity meters together form a system designed
to optimise the self-consumption of electrical energy in a household. The inverter
transfers energy between AC current and DC current while the battery pack is used for
the storage of energy (typically storing surplus energy produced by solar arrays).
The SMILE-G3 system is suitable for indoor and outdoor installation.
The SMILE-G3-INV must only be operated with PV arrays of protection class II in
accordance with IEC 61730, application class A. The PV modules must be compatible
with this product.
PV modules with a high capacity to ground must only be used if their coupling capacity
does not exceed 1.0 μF.
All components must be used in a manner and environment in compliance with the
requirements of this manual and in compliance with all relevant local Standards and
directives..
Alterations to the product, e.g. changes or modifications, are only permitted with the
express written permission of AlphaESS. Unauthorised alterations will void the product
warranty(s). AlphaESS shall not be held liable for any damage caused by such changes.
Any use of the product other than that described in the Intended Use section does not
qualify as appropriate.
The enclosed documentation is an integral part of this product. Keep the
documentation in a convenient place for future reference and comply with all
instructions contained therein.
The type label must remain permanently attached to the product.
Advertisement
Table of Contents
Troubleshooting
