Table of Contents
Advertisement
4. Storage and Transport
4.1. Storage
4.1.1. Inverter Storage
The following requirements should be met if the inverter is not put into immediate use:
1. Do not unpack the inverter.
2. Keep the storage temperature at -40~70°C and the humidity at 5%~95% RH.
3. The inverter should be stored in a clean and dry place and be protected from dust
and water vapor.
4. A maximum of six inverters can be stacked. To avoid personal injury or device
damage, stack inverters with caution to prevent them from falling over.
5. During the storage period, check the inverter periodically. Replace any damaged
packaging promptly.
6. Inverters stored for more than 2 years should be inspected and tested prior to
being put into service.
4.1.2. Battery Storage
The following requirements should be met if the battery pack is not put into use directly:
1. Place batteries according to the signs on the packing case during storage. Do not
put batteries upside down or store horizontally.
2. Stack battery cartons in accordance with the stacking requirements printed on the
external carton.
3. Store the battery pack out of reach of children and animals.
4. Handle batteries with care to avoid damage.
5. The storage environment requirements are as follows:
a.
Ambient temperature: -10~55°C, recommended storage temperature: 15~30°C
b.
Relative humidity: 15%~ 85%
c.
Place batteries in a dry, clean, ventilated location free from dust.
d.
store batteries away from corrosive organic solvents and gases.
e.
Keep batteries away from direct sunlight.
f.
Keep batteries at least 2 meters away from heat sources.
6. The batteries in storage must be disconnected and the indicators (if any) on the
batteries should be off.
7. Warehoused batteries should be delivered based on "first in, first out" stock control.
27
Advertisement
Table of Contents
Troubleshooting
