Introduction
Your Smart Energy
2. Safety Instructions
2.1 Manual Keeping
This manual contains important information about operating the system. Before operating,
please read it very carefully.
The PCS should be operated in strict accordance with the description in the manual, in case
that it causes damage or loss to equipment, personnel and property.
2.2 Operator Requirements
This manual should be kept carefully for maintenance and reparation.
The operators should get a professional qualification, or trained.
The operators should be familiar with the whole storage system, including compositions and
working principles of the system.;
The operators should be familiar with the Product Instruction.
While carrying out maintenance work it has to be at least two operators in the filed all the time.
They can't operate on any equipment until they are all powered off and fully discharged.
It is strictly prohibited for any maintenance to be carried out when equipment are on or
2.3 Protection of Warning Sign
charged.
The warning sign contains important information for the system to operate safely and it is
strictly prohibited to torn or damage the sign.
Ensure that the warning sign is always clear.
2.4 Setting of Warning Sign for Safety
The signs should be replaced immediately if damaged.
While instructing, maintaining and repairing, to prevent unrelated personnel nearby to cause
incorrect operation or accident, the suggestions below should be followed:
Obvious signs should be set at front switch and rear-level switch in case of accidents caused
by false switching.
Warning signs or tapes should be set near the operation areas.
Keys of the system must be pulled out after maintenance or operation.
______________________________________________________________________
Alpha ESS Co., Ltd.
Page 7 of 48