Reading The Status Information Led; Standalone / Offline Usage Modes - Webasto Unite Operating And Installation Instructions

7 | Setting up charging
7.2 Reading the status information
LED
1
Status information LED
LED
No LED Indication The charger is ready to
Blinks blue
4 sec
Green glowing
Blue glowing
Constant blue
Constant red
Blinks red
4 sec
Blinks purple
4 sec
Constant purple
Blinks red and
blue
1 sec
Constant green
16 / 26
1
Description
charge.
Finished charging with RFID
card.
Electric Vehicle is connec-
ted.
Charging Station is waiting
for RFID card authorization.
Charging is authenticated.
Charging in progress.
Charging suspended or fin-
ished.
Fault condition
Ventilation required mode.
Charging current limited to
16 A due to over temperat-
ure.
Charging is not possible
due to over temperature, or
the power optimizer cur-
rent limit is reached, or the
charger is disabled.
Charging station is re-
served.
Charging station is waiting
for Eco Time interval.
Charging station is in Delay
Charge Mode.
Firmware update
LED
Blinks red every
second for 60
seconds.
1 sec
Blinks blue every 2
seconds
2 sec
Blinks green 2
times
2 x
Blinks red 2 times User RFID card removed
2 x
Green glowing
Glows green for
30 seconds
30 sec
Blinks red 3 times Start / stop charging at-
3 x
7.3

Standalone / Offline Usage modes

First usage of "Standalone Usage" mode charger: Your charging
station's master RFID card is already registered to your unit and
you can find your master RFID card in its accessories.
1. Connect the charging cable to start charging.
2. Tap your master card to add a card.
7.3.1 Autostart (Freecharging) mode
7.3.1.1 Connecting & charging
No LED Indication
Make sure that your vehicle and the charging station are ready
for charging.
No LED Indication
Insert the charging plug into the vehicle inlet and the charging
station socket outlet.
Description
Master card config mode /
Local card list reset.
Waiting to tap a User RFID
card or configure Drive
green from a smartphone.
User RFID Card added to
local RFID list.
from local RFID.
Authorized
RFID Card is tapped while
the charging cable is con-
nected.
An authorized RFID Card is
tapped while the charging
cable is not connected.
tempt with unauthorized
RFID card.
5111966A ISI Webasto Unite (EN)