Setting Up Charging; Charging Cable Plug; Reading The Status Information Led - Webasto Unite Operating And Installation Instructions

9 | Setting up charging

9 Setting up charging
9.1

Charging cable plug

Fig. 32
1. Open the hinged lid of the outlet socket.
Fig. 33
2. Plug the charging cable plug into the outlet socket.
26 / 37
9.2 Reading the status information
LED
Fig. 51
1 Status information LED
LED
Constant blue (or
no LED Indication
in power save
mode)
Blinks blue
4 sec
Green glowing
Blue glowing
Constant blue
Constant red
Blinks red
4 sec
Blinks purple
4 sec
Constant purple
Blinks red and
blue
1 sec
Constant red
1
Description
The charger is ready to
charge.
Finished charging with RFID
card.
Electric Vehicle is connec-
ted.
Charging Station is waiting
for RFID card authorization.
Charging is authenticated.
Charging in progress.
Charging suspended or fin-
ished.
Fault condition
Ventilation required mode.
Charging current limited to
16 A due to over temperat-
ure.
Charging is not possible
due to over temperature, or
the power optimizer cur-
rent limit is reached, or the
charger is disabled.
Charging station is re-
served.
Charging station is waiting
for Eco Time interval.
Charging station is in Delay
Charge Mode.
Firmware update
5111967A OI-II Webasto Unite