Mounting on a Pole (Corner/Pole Mount)
CAUTION! Before mounting the camera, make sure that a network connection with power supply according
to the PoE Plus (802.3at-2009) standard is available at the mounting position (see
to the
Network).
NOTE! The pole should have a diameter between 60 and 180 mm.
For dimensions of the Corner/Pole Mount, please refer to
Step by Step
1. Guide the supplied stainless steel straps along the cutouts in the Corner/Pole Mount as shown in the fig-
ure.
Fig. 13: Prepare the pole mount with steel straps
2. Tighten the stainless steel straps on the Corner/Pole Mount with a screwdriver. If necessary, the ends of
the straps can be cut off.
Fig. 14: Tighten the straps
3. Push the supplied network cable through one of the holes
Fig. 15: Prepare the network cabling
4. Proceed by mounting the Wall Mount to the Corner/Pole Mount as described in
Mount, p.
46.
Dimensions MOBOTIX D71 Corner/Pole Mount, p.
①
.
Mounting
Mounting Options
Connecting the Camera
Mounting with the Wall
51 / 72
49.