Table of Contents
Advertisement
Operating the Camera
Network Settings
Fig. 22: Start screen of the MxManagementCenter
1. Click on Add Devices. The cameras are displayed either in a list or as tiles. Use the List and Tile buttons
to change the display mode.
Fig. 23: Cameras as list
The application automatically monitors and displays the operating status of all cameras using corresponding
icons.
EXAMPLE:
n
The camera is not in the same subnet as the computer.
n
The user name and password of the camera are not known.
NOTE! Using the Bonjour service (en.wikipedia.org/wiki/Bonjour_(software)), the application finds not only
MOBOTIX cameras on the same subnet, but also in other subnets. Normally, you would not be able to estab-
lish any connection to cameras in a different network or subnet.
NOTE! This is the case, for example, if you are integrating cameras into a network without DHCP server (i.e.
with fixed IP addresses) and the IP address range is different from the 10.x.x.x range supported by the cam-
eras in addition to DHCP.
MxManagementCenter can automatically configure such a camera so that it is "integrated" into your exist-
ing network.
2. Select the camera you want to set up and click on Edit Network Settings
gram window. The Change Network Settings for Selected Devices dialog opens.
62 / 72
at the bottom of the pro-
Advertisement
Table of Contents
