Mobotix D71 Quick Installation Manual page 45

Step by Step
1. Cut a round hole with a diameter of 200 mm into the ceiling (see
2. Run the network cable above the suspended ceiling and ensure that enough cable slack is available
3. Remove the rubber plugs
4. Secure the camera in the In-Ceiling Set
I.4, p. 21 each.
5. Connect the on-site network cable with the camera patch cable using a standard connector. Excess cable
can be stored easily within the In-Ceiling Set (see
①
from the front of the camera.
②
using the four supplied Allen screws
Drilling Template, p.
Connecting the Camera, p.
Mounting
Mounting Options
11).
I.3, p. 21 and one washer
52).
45 / 72