Table of Contents
Advertisement
I/Os
Microphone/Speaker
Integrated illumination
Shock detector (tamper
detection)
Max. power consumption
Electrical surge protection
PoE standard
Interfaces
Mounting Options
INPUT
n
Contact Closure (no galvanic isolation necessary) or up to 50V AC/DC
n
max. length for cables: 50m
OUTPUT
n
requires pull-up resistor and external power supply (10mA / max. 50V DC
- no AC)
n
max. length for cables: depends on loop impedance of the connected
cable.
Specs for cables connected to the PCB terminals:
Conductor cross section
AWG
Rigid
Flexible
Flexible with ferrule
Integrated Microphone:
n
Sensitivity: -35 dB +/-4 dB (0 dB = 1 V/pa, 1 kHz)
Integrated Loudspeaker:
n
0.9 W at 8 Ohm
Line in / Line out
IR up to 30 m/ 100 ft
(may be more depending on scene)
Yes
max. 25 W
Available with MX-Overvoltage-Protection-Box (not part of the scope of deliv-
ery)
PoE Plus (802.3at-2009)/Class 4 (Class 3 can be enabled via HW switch. Note: IR
illumination requires Class 4)
n
Ethernet 1000BaseT (RJ45 according to EIA/TIA-568B)
n
USB-C/USB2.0; High-Speed (V
Wall- or ceiling-mountable
Technical Specifications
20 - 26
2
0.14mm
- 0.5mm
2
0.14mm
- 0.5mm
2
0.25mm
- 0.34mm
= 5.1 V, I
= 0.9 A, P
out
out
Hardware
2
2
2
= 4.5 W)
out
25 / 72
Advertisement
Table of Contents
