Table of Contents
Advertisement
camera. If neither your network nor your computer use an IP address in the 10.x.x.x network (e.g. a
192.168.x.x or 172.x.x.x network), you should follow one of the following methods for changing the camera's
network parameters:
n
Manual setup
Automatic setup using MxManagementCenter
n
NOTE! For the following examples, we will use a camera with the factory IP address 10.16.0.99. Replace this
IP address with the IP address of your camera. You will find this address on a small sticker on the camera.
Make sure that the IP addresses used in the following examples are not used by any other devices on your
network.
Windows
Fig. 18: Network settings on Windows machines
1. Open the Windows Control Panel > Network and Internet > Network and Sharing Center > Change
Adapter Settings > Ethernet.
2. Right-click on the relevant network adapter and select Properties.
Operating the Camera
Network Settings
59 / 72
Advertisement
Table of Contents
