Table of Contents
Advertisement
Mounting
Mounting Options
Step by Step
Fig. 7: Drilling template with holes for positioning the fastener screws (red circles) and for the flush-mounted wall outlet
(green circle)
1. Mark the holes
①
a suitable 8 mm drill bit and drill holes at least 60 mm/1.2 deep.
NOTE! The drilling template also includes a circle
wall outlet, in addition to the drilling holes.
2. Fully push the dowels
3. Establish the PoE network connection to the camera (see
4. Mount the camera using the supplied pan head screws
40 / 72
for drilling using the drilling template (see
M.4, p. 19
into the holes you drilled.
Drilling Template as
②
marking the minimum size and position of the
Connecting the Camera to the Network, p.
M.5, p.
19.
PDF). When drilling, use
55).
Advertisement
Table of Contents
