Table of Contents
Advertisement
Operating the Camera
Network Settings
3. Open the properties of Internet Protocol Version 4 (TCP/IPv4).
Fig. 19: Properties of Internet Protocol V4
4. Activate Use the following IP-address. Enter an IP address in the 10.x.x.x range in this field (e.g.
10.16.0.11).
5. Click on OK to apply the settings.
Linux/Unix
1. Open a terminal as root user.
2. Enter the following command: ifconfig eth0:1 10.16.0.11.
3. The computer now has the additional IP address 10.16.0.11.
macOS
Fig. 20: Network settings on macOS machines
1. Open System Settings > Network.
2. Click on Ethernet and in the Configuration field, select the Manual list entry and enter an IP address in
the 10.x.x.x IP address range (e.g., 10.16.0.11).
3. Click on Apply to apply the settings.
60 / 72
Advertisement
Table of Contents
