Table of Contents
Advertisement
Connecting the Camera to the Network
CAUTION!
n
The PoE switch must provide Class 4 according to PoE Plus (802.3at-2009) as well as the 100/1000
Mbps Ethernet interface of the camera.
n
It is highly recommended to use an uninterruptible power supply (UPS) for the switch.
n
The maximum length of the network cable for remotely supplying power is 100 m (300 ft).
Fig. 17: Power supply using PoE switch according to PoE Plus (802.3at-2009).
Connecting the camera to the network
1. To uncover the RJ45 network connector, remove the bayonet catch
and pull it off with the blue rubber plug.
Connecting the Camera
①
by rotating it counter-clockwise
Mounting
55 / 72
Advertisement
Table of Contents
