Table of Contents
Advertisement
MOBOTIX Camera in the Browser
Fig. 21: Network settings in the web interface of the camera
1. Use a web browser to access the web interface of the MOBOTIX camera and enter the factory IP address
(e.g. 10.16.0.99).
2. Click on the Admin Menu button in the user interface of the camera. The Quick Installation automatically
starts after entering the access credentials of the admin user.
NOTE! Factory access credentials:
User name: admin
Password: meinsm
NOTE! You can also run the Quick Installation later on (Admin Menu > Network Configuration > Quick
Installation; see Reference Manual).
3. Enter the network parameters of the camera in the course of the quick installation.
NOTE! You can also change the network parameters later on by running Admin Menu > Network
Configuration > Quick Installation.
4. Reboot the camera to apply the network settings.
MOBOTIX Camera in MxManagementCenter
MxManagementCenter is a video management software for setting up and using the entire video surveillance
system that provides a range of functions for different tasks and user groups. You can download the newest
release of MxManagementCenter from the MOBOTIX website (www.mobotix.com > Support > Download
Center > Software Downloads, MxManagementCenter section).
NOTE! Please refer to the MxManagementCenter help for more information.
Procedure
When starting MxManagementCenter for the first time, the configuration wizard opens and automatically
starts searching for MOBOTIX cameras. The number of found cameras is shown as a counter next to the Add
Devices icon . This number is updated automatically if the number of MOBOTIX cameras on the network has
changed (i.e., by connecting new/disconnecting existing cameras).
Operating the Camera
Network Settings
61 / 72
Advertisement
Table of Contents
