Error Check - Konica Minolta CS-3000HDR Instruction Manual

Error Check

Should any errors be found in the instrument, try the corrective actions shown in the following table. If
this does not help, it is possible the instrument is broken. Please contact the nearest KONICA MINOLTA-
authorized service facility with the error number and the version of your instrument. See p.90 for
details about how to confirm the instrument version.
Error
Symptom
No.
1 No display on the LCD after
power is turned on.
2 Nothing is visible through
the finder as the field of
view is dark.
3 Nothing is displayed on the
LCD.
4 Does not accept key
operation.
5 Measurement is not possible
even when the measurement
button is pressed.
6 The entered value for target
color is different from the
one that will be displayed
after setting.
7 Measurement values do
not appear.
Item to check
Has the AC adapter been
properly plugged into the
AC outlet?
Has the AC adapter been
connected to this
instrument?
Has a wrong AC adapter
been connected?
Is AC power source within
rated scale?
Is the lens cap still attached
to the objective lens?
Is the ND filter attached to
the objective lens?
Is the ND eyepiece filter
attached to the finder?
Is the backlight set to OFF?
Has the backlight been set
to OFF during
measurement?
Has the remote mode been
set?
Have you pressed a disabled
key?
Is a screen other than MEAS
displayed?
Is there data?
Has the color space mode
become color temperature?
Did you interrupt
measurement?
98
Corrective action
Connect the AC Adapter.
Connect the AC Adapter.
Be sure to use the AC adapter and
power cord supplied as a standard or
optional accessory (AC-A312G).
Use within ±10% of the nominal
voltage.
Remove the lens cap.
Use the ND filter when the luminance of
the object being measured is too high.
Use the ND eyepiece filter when the
luminance of the object being
measured is too high.
Press BACKLIGHT key to turn
ON the backlight.
In the menu operation, set the
backlight to ON during measurement.
Press ESC key to cancel the remote
mode.
Press the correct key.
Perform measurement when the
MEAS screen is displayed.
A 1-digit difference may be found due
to calculation error.
Perform measurement when the
MEAS screen is displayed.
Color temperature is displayed as "_ _ _" if
it is far from the black body locus. Display
in a different color mode to confirm.
Conduct measurement again.
Reference
page
21
21
21
21
8
9,
52
9,
52
14,
56
56
85
—
71
—
70
48
70