Table of Contents
Advertisement
2
. Press either
and then press ENTER key.
The MENU - MEAS screen appears on the LCD.
The current set contents are displayed in the [ANGLE]
item.
3
. Press either
[ANGLE] and then press ENTER key.
The MENU - ANGLE (for selection of measurement
angle) screen appears on the LCD.
4
. Press either
[0.2°] / [0.1°] and then press ENTER key.
When the measurement angle is set, the MENU - MEAS
screen appears again on the LCD.
Motor noise may be heard when switching the
measurement angle electrically, but this is not abnormal.
By pressing the ESC key, the setting is canceled and
the MENU - MEAS screen appears again on the LCD.
The display format setting is saved even after the power
switch is turned OFF (O).
5
. Press ESC key.
The MENU screen appears again on the LCD.
6
. Press ESC key.
The MEAS screen appears again on the LCD.
CS-2000Plus
The measurement angle is set to any of [1°], [0.2°] or
[0.1°] by rotating the measurement angle selector.
Do not move the measurement angle selector during
measurement. Switching during measurement may result in
failure of measurement or erroneous readings.
When rotating the measurement angle selector, move it to the
position where you feel a click. Rotating it only halfway may
result in failure of measurement or erroneous readings.
or
key to select [MEAS]
or
key to select
or
key to select [1°] /
41
M E N U
M E A S
S P E E D
NORMAL
S Y N C
INT SYNC
S Y N C F R A M E
DOUBLE FRAME
A N G L E
1˚
M E N U
M E A S
ANGLE
S P E E D
NORMAL
1˚
0.2˚
S Y N C F R A M E
0.1˚
DOUBLE FRAME
A N G L E
1˚
M E N U
M E A S
S P E E D
NORMAL
S Y N C
INT SYNC
S Y N C F R A M E
DOUBLE FRAME
A N G L E
0 . 1˚
1°
0.2°
0.1°
Advertisement
Table of Contents
