Konica Minolta CS-3000HDR Instruction Manual page 31

4
-b-3. Press ENTER key.
The cursor moves to the IN-ND item.
This screen is used to determine whether the ND
filter built into the main unit is used or not.
4
-b-4. Press either
/ [OFF] or [ONE] / [TWO]
* [TWO] can only be selected with CS-3000HDR.
If the "OVER" error message appears when set
to [OFF], set IN-ND to [ONE] or [TWO].
When measuring objects that have a wide range of luminance under the
adjusted measurement conditions (ex. γ measurement), set IN-ND to
[OFF], or to [ONE] or [TWO]. For [OFF] or [ONE]/[TWO], select [OFF]
when the upper limit luminance is up to 100 cd/m
to less than 5,000 cd/m
4
-b-5. Press ENTER key.
When the setting is confirmed, the MENU - MEAS -
SPEED MODE screen appears again on the LCD.
For the MANUAL setting
4
-c-1. Select [MANUAL] and press ENTER key.
The MENU - MEAS - SPEED MODE - MANUAL
screen appears on the LCD. This screen is used to
input the integration time in the MANUAL mode.
4
-c-2. Press either
Press key for a larger number.
Press key for a smaller number.
The setting range of integration time
is from 5 to 120,000 ms.
The significant figures for integration time are 6 digits.
However, in the case of CS-2000Plus, the actual
integration time when the integration time is 4 seconds
or more will be an integral multiple of 4 seconds.
or key to select [AUTO]
* .
2
, or [ONE] if it is 100
2 , or [TWO] if it is 5,000 to 100,000 cd/m
or key to set a value.
29
S P E E D
M U L T I - I N T E G
I N T E G T I M E
I N - N D
S P E E D
M U L T I - I N T E G
I N T E G T I M E
I N - N D
2
.
S P E E D
MULTI-NORMAL
MULTI-F A S T
M A N U A L
S P E E D
MULTI-NORMAL
MULTI-F A S T
M A N U A L
S P E E D
I N T E G T I M E
0 0 0 0 3 3 . 3 3 3 m s
S P E E D
I N T E G T I M E
0 0 0 0 3 3 . 3 3 0 m s
M E N U
M E A S
MODE ( 2/2 )
1 0 s
A U T O
M E N U
M E A S
MODE ( 2/2 )
1 0 s
T W O
M E N U
M E A S
MODE ( 2/2 )
M E N U
M E A S
MODE ( 2/2 )
M E N U
M E A S
MODE ( 2/2 )
MANUAL
I N- N D O F F
M E N U
M E A S
MODE ( 2/2 )
MANUAL
I N- N D O F F