Saving Measurement Values - Konica Minolta CS-3000HDR Instruction Manual

Saving Measurement Values

This instrument can save 100 measurement values with designated numbers from 00 to 99.
Operating Procedure
1
. When the MEAS screen is displayed,
press MEMORY key to switch
to the MEMORY screen.
The MEMORY (Measurement Value) screen
appears on the LCD.
The memory data number 00 is displayed.
2
. Press either
the number of memory data to which
the measurement value is saved.
Press key for a larger number.
Press key for a smaller number.
3
. Press ENTER key.
If a measurement value has already been registered
for the selected number, the display switches to the
confirmation screen for overwriting. To overwrite it,
select [OK]. To cancel it, select [CANCEL] and press
ENTER key. Once it is overwritten, it cannot be
restored to the state before the overwrite. Check the
memory data number carefully before overwriting it.
Measured values are saved in the selected number.
By pressing ESC key, saving is canceled and
the MEAS screen appears again on the LCD.
1
or key to select
73
2, 3
M E M O R Y
MEASURE
c d m
Lv 54.22
x 0.4045
y 0.4073
MEMORY 00
c d m
Lv 7.285
x 0.1700
y 0.0938
CMF SPD SYN Hz ACC
[ ]
2˚ Nr m 5 9 . 9 4 Non
M E M O R Y
MEASURE
c d m
Lv 54.22
x 0.4045
y 0.4073
MEMORY 10
c d m
Lv
x
y
CMF SPD SYN [ Hz ] ACC
2˚ Nr m 5 9 . 9 4 Non
M E M O R Y
MEASURE
c d m
Lv 54.22
x 0.4045
y 0.4073
MEMORY 10
c d m
Lv 54.22
x 0.4045
y 0.4073
CMF SPD SYN [ Hz ] ACC
2˚ Nr m 5 9 . 9 4 Non
2
2
2
2
2
2