Konica Minolta CS-3000HDR Instruction Manual page 37

3
. Press either
and then press ENTER key.
The MENU - MEAS - SYNC MODE screen appears on
the LCD.
The synchronization method selection screen
appears.
4
. Press either
SYNC] and then press ENTER key.
The MENU - MEAS - SYNC MODE - INT SYNC screen
appears on the LCD.
5
. Press the measurement button
(MEASURE).
The emission frequency of the measurement object is
detected and the detected frequency is displayed.
6
. Press ENTER key.
The detected frequency is imported into the
synchronized measurement [INT SYNC].
The MENU - MEAS - SYNC MODE screen appears
again on the LCD.
7
. Press ESC key.
The MENU - MEAS screen appears again on the LCD.
8
. Press ESC key.
The MENU screen appears again on the LCD.
9
. Press ESC key.
The MEAS screen appears again on the LCD.
or key to select [SYNC]
or key to select [INT
35
M E N U
M E A S
SYNC MODE
NO SYNC
I N T SYNC
E X T SYNC
M E N U
M E A S
SYNC MODE
I N T SYNC
I N T S Y N C
0 5 9 . 9 4 H z
M E A S : S C A N
F R E Q U E N C Y
M E N U
M E A S
SYNC MODE
I N T SYNC
I N T S Y N C
0 8 9 . 9 4 H z
M E A S : S C A N
F R E Q U E N C Y
M E A S S N G L U C 0 0
Lv
49. 35 c d
x
0 . 3908
y
0 . 4012
CMF SPD SYN [ Hz ] ACC
2˚ Mnl 8 9 . 9 4 Non
1˚
m 2