Fujitsu AIRSTAGE J-II Design & Technical Manual page 625

Case2 : When setting number is two digits.
(11-2) Indoor unit will display the function setting number on "OPERATION"(GREEN), "TIMER
"(ORANGE) and "FILTER "(RED) light.
Phase1
OPERATION TIMER
(GREEN) (ORANGE)
Flashing times of Flashing times of
function numbers function numbers
(the ten's place) (the one's place)
The display of "Phase1" and
"Phase2" is alternately repeated.
Phase2
OPERATION TIMER
(GREEN) (ORANGE)
OFF OFF
Number 0 setting will not indicate TIMER LAMP and FILTER LAMP.
¾
Confirmation of function setting
z „
(12) Press the "TIMER set (+)" button.
"TIMER set (+)"
FUNCTION DETAILS
„ „
Refer to 2-8. FUNCTION DETAILS.
FILTER
(RED)
Flashing times of
setting numbers
(the one's place)
FILTER
(RED)
Flashing times of
setting numbers
(the ten's place)
PiPi
CORRECT : Pi PiPiPiPiPi
PiPi
WRONG: Pi (3 sec)
- (07-99) -
(Example) Function number : 26, Setting number : 31
0.5sec ON / 0.5sec OFF
OPERATION LAMP
2 times
(GREEN)
0.5sec ON / 0.5sec OFF
TIMER LAMP
(ORANGE)
0.5sec ON / 0.5sec OFF 0.5sec ON / 0.5sec OFF
FILTER LAMP
1 time
(RED)
(Phase1) : 12sec
...
OFF
6 times
...
OFF
...
3 times
(Phase2) : 12sec