Adaptor / Convertor Units; Network Convertor; Network Convertor For L; On Orks - Fujitsu AIRSTAGE J-II Design & Technical Manual

3.

ADAPTOR / CONVERTOR UNITS

The following types of convertors and adaptors are available.
Network Convertor (UTY-VGGXZ1)
•
- For connecting single split type system.
( A change of DIP switch setting is necessary )
- For connecting group remote controller(s).
•

Network Convertor for L

For connection between VRF network system and a L
management of small to medium-sized BMS.
• BACnet Gateway (UTY-ABGX: Software)
®
The central control of maximum 1600 indoor units can be realized by connecting the VRF
network system to the BACnet
• Signal Amplifier (UTY-VSGXZ1)
When the total length of transmission line exceeds 500 m or the number of units exceeds 64,
Signal amplifier will be necessary.
• External Switch Controller (UTY-TEKX)
Air conditioner switching can be controlled by connecting other sensor switches.
W (UTY-VLGX)
ORKS ®
ON
, a global standard for open networks.
®
- (05 - 99) -
W open network for
ORKS ®
ON