Fujitsu AIRSTAGE J-II Design & Technical Manual page 427

PACKING LIST
„ „
The following installation parts are supplied. Use them as required.
Name and shape
Installation manual
Cable tie
Screw
(M4 × 20 mm)
Terminal resistor
Dust proof bushing
Connecting wire
WIRING SPECIFICATIONS
„ „
Use
Maximum
Power supply cable
Minimum
Transmission cable
Fuse capacity
SPECIFICATIONS
„ „
Main specification
z „
Power supply
Input Power (W)
Temperature (°C)
Humidity (%)
Dimensions [H × W × D] (mm)
Weight (g)
Quantity
1
3
4
1
1
1
Size
2
1.25 mm
60245 IEC 57 or equivalent
2
0.5 mm
LEVEL4 (NEMA) non-polar 2
0.33 2
mm
core, twisted pair solid core
(22AWG)
3 A
1ø AC208-240 V 50/60 Hz
Operating
Packaged
Packaged
No condensation
- (05 - 123) -
Application
For mounting the power supply cable, and
transmission cable.
For mounting the signal amplifier.
It is used when there is no terminal resistor in a segment.
For connecting the power supply cable.
For setting the filter mode
Wire type
1 ø AC208-240 V 50/60 Hz,
2-Wire + ground
(Always ground the unit)
L
Shielded
4.5
0 to 46
-10 to 60
0 to 95 (RH) ;
67 × 288 × 211
1500
Remarks
®
W compatible cable
ON ORKS